The MSE display solution is a high-contrast LCD with simple operation and easy user guidance.

The new Cubis is the first user-configurable and customizable laboratory balance series designed for users who always need the most advanced weighing technology, but who also want to invest only in what is necessary for the task at hand.

Every Cubis uncompromisingly implements your specific requirement profile and application needs. Cubis meets the strict criteria for Advanced Pharma Compliance. Its ideal for quality management systems in the regulated areas of pharmaceutical, chemical and food industries.

The Cubis series is a modular system that offers a choice of display and control units, weighing modules and draft shields

With Cubis, you never have to invest in completely new equipment. This is what makes the Cubis modular design so special, with a number of unique advantages:

1. Optimal interchangeability or extension of modules
2. Shorter innovation cycles for individual modules
3. Faster development of additional modules
4. A full range of accessories that enable you to customize your balance even further

All Cubis controls are easy to use, clearly designed and logically structured. Their user guidance features prevent time-consuming and cost-intensive operating errors.

In addition, you can adjust the tilting angle of the display and control unit to ensure optimal viewing at all times. All Cubis units come with standard internal motorized calibration

With Cubis theres a choice of three display and control units. They cover the entire range of laboratory applications from simple weighing right on up to management of complex work sequences by means of defined tasks and the User/ Password Management menu.

• Power Requirements: 100-240V~, -15%/+10%, 50-60Hz, 1,0A
• Input Voltage: 15 Vdc, ± 5%
• Ambient Temperature, Operation +5 °C...+41°F - +104°F
• Highest Relative Humidity80% for temperatures up to 31°C/88° F, decreasing linearly up to 50% relative humidy for 40°C/104°F
• Safety of electrical equipmentAccording to EN 61010-1:2001: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• Electromagnetic CompatibilityAccording to EN 61326-1:2006: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• Interference ResistanceSuitable for use in industrial areas
• Immunity to Interference: Class B: Suitable for use in residential areas and areas that are connected to a low voltage network that also supply residential buildings.

Model:	MSE5203S-000-DE	MSE5203P-000-DE	MSE3203S-000-DE	MSE2203S-000-DE	MSE2203P-000-DE	MSE1203S-000-DE	MSE623S-000-DE	MSE623P-000-DE	MSE323S-000-DE
Capacity x Readability	5200g x 1mg	1200g x 1mg 2400g x 2mg 5200g x 5mg	3200g x 1mg	2200g x 1mg	1010g x 1 mg 2200g x 10mg	1200g x 1mg	620g x 1mg	150g x 1mg 300g x 2mg 620g x 5mg	320g x 1 mg
Tare Range (Subtractive)	- 5200g	- 5200g	- 3200g	-2200 g		-1200 g	-620 g		-320 g
Resolution (mg)	1
Average Stabilization Time (s)	< 1 second						< 0.8 seconds
Average Response Time (s)	< 2 seconds			< 1.5 seconds			< 1 second
Repeatability (std. deviation)(mg)	< ± 1				< ± 1 < ± 6	< ± 0.7		< ± 1 < ± 2 < ± 4	< ± 0.7
Linearity (±)	0.005g	0.005g	0.005g	0.003g	0.005g	0.002g	0.002g	0.005g	0.002g
Corner Load (mg)* (Test Load [g])	2 (2,000)	2 (2,000)	2 (2,000)	2 (2,000)	3 (1,000)	2 (500)	2 (200)	4 (200)	2 (200)
Minimum Sample Weight** (g)	1.5
Sensitivity Drift Within +10...+30°C/ +50°F	± ppm/K 1					± ppm/K 1.5	±: ppm/K 2
External Calibration Weight (of at least accuracy class...)(g)	5000 (E2)		3000 (E2)	2000 (E2)	1000 (E2)		500 (E2)	500 (F1)	200 (E2)
Display Update Rate (Depends on The Filter Level Selected)	0.1-0.4 seconds
Weighing Pan (W x D) [mm/in]	140 x 140/5.5 x 5.5
Weighing Chamber Height (DE Draft Shield) (mm/in)	172/6.8
Draft Shield	Manual analytical draft shield chamber, with smooth-action doors that open wide and provide unimpeded access to the weighing chamber without any interfering frame braces. For all models with a readability of 0.01 mg, 0.1 mg or 1 mg.
Protection	Degree of protection against dust and water
Operation	Keys
Display	Liquid-Crystal display, black and white
Adjustment of the display and control unit	Control unit detachable
Standard interface ports	-USB (built into weighing module) -RS-232C port for connecting accessories, 25-pin (built into weighing module)
SD Card Reader	Not Available
Operation of the Motorized Draft Shield (Only Applies to DA or DI Draft Shield)	Activated by positive feedback tactile keys or touch-free using IR switch (optional); learning function
Applications	-Mass unit conversion by toggling -SQmin function for minimum sample weigh according to the USP -isoCAL automatic calibration/adjustment function, determination(buoyancy method only) -Density calculation -Averaging (weigh averaging) -Net/Total formulation -Weighing in percent -Counting
*Position acc. to OIML R76 ** = Typical minimum sample weight acc. to USP (United States Pharmacopoeia), USP31-NF26

Weight: 26.00 lb