The MSA display solution utilizes a state of the art TFT touchscreen. The MSA is designed to make complex taskes more simplistic, it sets the benchmark for future balance operations. Ethernet port and SD card reader standard.

The new Cubis is the first user-configurable and customizable laboratory balance series designed for users who always need the most advanced weighing technology, but who also want to invest only in what is necessary for the task at hand.

Every Cubis uncompromisingly implements your specific requirement profile and application needs. Cubis meets the strict criteria for Advanced Pharma Compliance. Its ideal for quality management systems in the regulated areas of pharmaceutical, chemical and food industries.

The Cubis series is a modular system that offers a choice of display and control units, weighing modules and draft shields

With Cubis, you never have to invest in completely new equipment. This is what makes the Cubis modular design so special, with a number of unique advantages:

1. Optimal interchangeability or extension of modules
2. Shorter innovation cycles for individual modules
3. Faster development of additional modules
4. A full range of accessories that enable you to customize your balance even further

All Cubis controls are easy to use, clearly designed and logically structured. Their user guidance features prevent time-consuming and cost-intensive operating errors.

In addition, you can adjust the tilting angle of the display and control unit to ensure optimal viewing at all times. All Cubis units come with standard internal motorized calibration

With Cubis theres a choice of three display and control units. They cover the entire range of laboratory applications from simple weighing right on up to management of complex work sequences by means of defined tasks and the User/ Password Management menu.

• Power Requirements: 100-240V~, -15%/+10%, 50-60Hz, 1,0A
• Input Voltage: 15 Vdc, ± 5%
• Ambient Temperature, Operation +5 °C...+41°F - +104°F
• Highest Relative Humidity80% for temperatures up to 31°C/88° F, decreasing linearly up to 50% relative humidy for 40°C/104°F
• Safety of electrical equipmentAccording to EN 61010-1:2001: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• Electromagnetic CompatibilityAccording to EN 61326-1:2006: Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• Interference ResistanceSuitable for use in industrial areas
• Immunity to Interference: Class B: Suitable for use in residential areas and areas that are connected to a low voltage network that also supply residential buildings.

Model:	MSA-225S-000-DU	MSA-225P-000-DU	MSA-125P-000-DU	MSA-524S-000-DU	MSA-524P-000-DU	MSA-324S-000-DU	MSA-224S-000-DU	MSA-324P-000-DU	MSA-124S-000-DU
Capacity x Readability	220g x 0.01mg	60g x 0.01mg 120g x 0.02mg 220g x 0.05mg	60g x 0.05mg 120 x 0.1mg	520g x 0.1mg	120g x 0.1mg 240g x 0.2mg 520g x 0.5mg	320g x 0.1mg	220g x 0.1mg	80g x 0.1mg 160g x 0.2mg 320g x 0.5mg	120g x 0.1mg
Tare Range (Subtractive)	-220 g		-120 g	-520 g	-520 g	-320 g	-220 g	-320 g	-120 g
Resolution (mg)	0.01			0.1
Average Stabilization Time (s)	2 seconds			1 second
Average Response Time (s)	6 seconds			3 seconds
Repeatability (mg)	0-60 g: 0.015 60-220 g: 0.025	0-60 g:0.015 60-220 g: 0.04	0-60 g: 0.015 60-120 g: 0.06	0.1	0.15 | 0.2 | 0.4	0.4	0.07	0.4	0.1
Linearity (mg)	0.1	0.15		0.4	0.5	0.3	0.2	0.5	0.2
Corner Load (mg)* (Test Load [g])	0.15 (100)	0.2 (100)	0.15 (50)	0.3 (200)	0.4 (200)	0.3 (200)	0.2 (100)	0.4 (200)	0.2 (50)
Minimum Sample Weight** (g)	0.02			0.12
Sensitivity Drift Within +10...+30°C/ +50°F	1 ± ppm/K
External Calibration Weight (of at least accuracy class...)(g)	200 (E2)		100 (E2)	500 (E2)	500 (E2)	200 + 100 (E2)	200 (E2)	200 + 100 (E2)	100 (E2)
Display Update Rate (Depends on The Filter Level Selected)	0.2-0.4 seconds
Weighing Pan (W x D) [mm/in]	85 x 85/3.3 x3.3
Weighing Chamber Height (DU Draft Shield) (mm/in)	261/10.2
Draft Shield	Manual analytical draft shield chamber, with smooth-action doors that open wide and provide unimpeded access to the weighing chamber without any interfering frame braces. For all models with a readability of 0.01 mg, 0.1 mg or 1 mg.
Protection	Degree of protection against dust and water
Operation	Touch Screen, Keys for main basic functions
Display	High Resolution color TFT, 5.7" graphic display
Adjustment of the display and control unit	Display tiltable; Control unit detachable
Standard interface ports	-USB (built into weighing module) -RS-232C port for connecting accessories, 25-pin (built into weighing module) -Ethernet (built into display and control unit)
SD Card Reader	Built into display and control unit as a standard feature
Operation of the Motorized Draft Shield (Only Applies to DA or DI Draft Shield)	Activated by posiitive feedback tactile keys or touch-free using IR switch (optional); learning function
Applications	-Mass unit conversion by toggling -SQmin function for minimum sample weigh according to the USP -isoCAL automatic calibration/adjustment function -Customized identification -Density determination -Statistics -Calculation -Averaging (weigh averaging) -Formulation -Weighing in percent -Time-Controlled Functions -Totalizing -Second tare memory -Counting -Over/ under checkweighing
	Free Shipping	Free Shipping	Free Shipping	Free Shipping	Free Shipping	Free Shipping	Free Shipping	Free Shipping	Free Shipping
*Position acc. to OIML R76 ** = Typical minimum sample weight acc. to USP (United States Pharmacopoeia), USP31-NF26