| Mark-10 G1011 Rubber Tip |
|
This attachment is designed to simulate a finger for testing pushbuttons, membrane switches, etc. Use this grip with a Mark-10 force gauge and test stand to create a complete compression testing system.
Capacity
(lb / N) |
Weight
(lb / kg) |
| 50 / 250 |
0.01 / 0.004 |
|
| Mark-10 G1018 Swivel Adapter |
|
Use these adapters between any grip and force gauge to provide a swiveling action for proper sample alignment.
| Model |
Capacity
(lb / N) |
Weight
(lb / kg) |
A |
B |
| G1018-1 |
200 / 1000 |
0.12 / 0.05 |
#10-32M |
#10-32M |
| G1018-2 |
500 / 2500 |
0.27 / 0.12 |
5/16-18M |
5/16-18M |
|
| Mark-10 G1016 and G1017 Series STH Torque Sensor Attachments |
G1016-1 above
G1016-2 above
G1016-3 above
G1017 above
|
G1016 diagram above
G1017 diagram above
|
These attachments mount directly to Series STH torque sensors for various torque measurement applications. Select a size appropriate for your sample.
| G1016-1 |
100 / 11.3 |
026 / 0.12 |
2.9 / 73.7 |
0.188 / 4.7 |
0.028-0.25 / 0.7-6.3 |
| G1016-2 |
0.36 / 0.16 |
3.16 / 80.3 |
0.062-0.375 / 1.6-9.5 |
| G1016-3 |
0.67 / 0.3 |
3.73 / 94.7 |
0.078-0.5 / 2-12.7 |
| G1017 |
0.11 / 0.05 |
2.33 / 59.2 |
1/4" hex |
|
| Mark-10 G1010 Jacobs Chuck Pin Vise |
|
This grip is suitable for holding round samples such as wire or tubing up to 0.375" dia. It can mount to any force gauge or test stand. Includes key.
| Capacity (lb-in / N-m) |
Weight (lb / kg) |
A |
| 30 / 150 |
0.35 / 0.16 |
0.062-0.375 / 1.6-9.5 |
|
| Mark-10 Hooks |
|
These hooks are ideal for a variety of tensile tests. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity (lb / N) |
Weight (lb / kg) |
RA |
|
|
D |
| G1028 |
20 / 100 |
0.01 / 0.005 |
0.05 / 1.3 |
1.0 / 25.4 |
0.1 / 2.5 |
#10-32F |
| G1038 |
200 / 1000 |
0.02 / 0.009 |
0.2 / 5.1 |
1.5 / 38.1 |
0.19 / 4.8 |
#10-32M |
| G1035 |
500 / 2500 |
0.5 / 0.023 |
0.3 / 7.6 |
1.9 / 48.3 |
0.28 / 7.1 |
5/16-18M |
| G1042 |
1000 / 4500 |
0.32 / 0.145 |
0.5 / 12.7 |
4.1 / 104.1 |
0.45 / 11.4 |
1/2-20M |
|
| Mark-10 G1029 & G1036 Flat Heads |
|
These attachments are ideal for compression testing of buttons, membrane switches, etc. Use them with a force gauge and a test stand to create a complete testing system.
| Model |
Capacity (lb / N) |
Weight (lb / kg) |
A |
B |
C |
| G1029 |
200 / 1000 |
0.01 / 0.005 |
0.5 / 12.7 |
0.5 / 12.7 |
#10-32F |
| G1036 |
500 / 2500N |
0.06 / 0.027 |
0.75 / 19.1 |
0.87 / 22.1 |
5/16-18F |
|
