valuescale.com
ValueScale.com - Scales and Weighing Products at Discount Prices
Toll Free 800-832-0055 View Shopping Cart
Contact Us
Home

Products:

Manufacturers:
Acculab
AND Weighing
Best Weight
CAS
Chatillon
Detecto
DigiWeigh
Dillon
EasyWeigh
HealthOMeter
Hoto Instruments
Imada
InScale
Mark-10
MedWeigh
Mettler Toledo®
Minx
Ohaus
Salter Brecknell
Sartorius
Seca
Tanita
 

AND MF-50, MS-70 and MX-50 Moisture Balances

AND Weighing MF-50 Scales / Moisture Balances: AND MF-50 and MX-50 Moisture Balances
AND Weighing MF-50 Moisture Balance

AND Weighing MX-50 Scales / Moisture Balances: AND MF-50 and MX-50 Moisture Balances
AND Weighing MX-50 Moisture Balance

AND MS-70 moisture analyzer
AND MS-70 moisture analyzer

AND MF-50, MS-70 and MX-50 Moisture Balances
currently in stock
Shipping Weight: 15 lbs. (estimate shipping cost)
Other Lab Scales
Other Moisture Balances
Other AND Scales

FREE UPS Ground Shipping
(within the 48 continental US States)

  
AX-31 Sample Pan (0.85mm, 100 pcs), add $85.00
AX-32 Glass Fiber Sheet (0.70mm, 100 pcs), add $49.00
AX-33 Test Sample (Sodium Tartrate Dihydrate, 30 g x 12 pcs), add $78.00
AX-34 Halogen Lamp for AC100V to 120V, add $59.00
AX-35 Pan Handle (2 pcs), add $25.00
AX-36 Tweezers (2 pcs), add $15.00
AX-37 Spoon (2 pcs), add $19.00
AX-38 Display Cover (5 pcs), add $39.00
AX-39 Dust Cover, add $15.00
AX-42 WinCT-Moisture (CDROM), add $195
AX-43 Certified Temperature Calibrator (for MS & MX only), add $425.00
AD-1700-20G Calibration Mass (20g), add $37

The AND Weighing MF, MS and MX series moisture analyzers are ideal for food, pharmaceutical, chemical processing, or any moisture analysis application, particularly those needing GLP/GMP/ISO compliance. This one of a kind drying system, combined with an advanced heat protection mechanism for the weigh cell, provides superior accuracy and repeatability

Fast and uniform heating with halogen lamp and innovative SRA technology
Straight halogen lamp and uniquely designed SRA (Secondary Radiation Assist) filter gives shorter measurement time, thanks to fast and uniform heating.

High Repeatability
With SHS (Super Hybrid Sensor) featured as the weight sensor, ultra accurate moisture content determination is possible based on high precision weighing of even a small sample

High moisture content measurement
MS-70 measures the moisture content at 0.001% resolution suitable for low moisture content samples as well as Karl Fischer method, yet requires no special knowledge or training and produces no harmful waste

Standard WinCT-Moisture (for MS & MX) for real-time graph displaying
WinCT-Moisture is an original software application designed to display a graph of moisture content rate change while measuring with a connected PC

Sodium Tartrate Dihydrate comes a s standard for accuracy checking
Sodium Tartrate Dihydrate is a chemical material that has stable moisture content of 15.66% and thus is best for use for accuracy check to maintain the reference value of the analyzer

Calibration of the heater temperature (for MS & MX)
With the temperature calibrator (optional), calibration result can be output in the format that conforms to GLP, GMP, ISO

Memory Function - According to sample up to 20 suitable measurement conditions can be stored and recalled, which saves time and prevents the user from making a mistake when setting (10 for MF)

Five Measurement Programs - Five choices of measurement programs: Standard, Automatic, Quick, Timer and Manual Mode are provided:

  • Standard Mode: just measurement accuracy: HI, MID or LO needs to be set
  • Automatic Mode: Ends measurement when moisture content changes at a rate less than the set rate
  • Quick Mode: Begins heating samples at 200° C for 3 minutes, then is the same as Automatic Mode
  • Timer Mode: Continues measurement for a set duration of time (1-60 minutes by 1 minute, 60-480 min by 5 min)
  • Manual Mode: STOP button should be pressed to end measurement (max heating time = 480 minutes)

Selectable Heating Mode
Choose the heating mode from standard, quick, step and ramp heating modes for the most suitable measurement (ML has Standard and Quick heating modes only)

Clear and easy to see, large VFD display
Measurement, setting value, change in moisture content, action status, data number and other important information are clearly displayed

Easy handling of the unit
Ergonomically designed pan handle eliminates mishaps such as burns when moving a hot sample pan into or out of the unit from either side. Wing handle for easy opening and closing of the heater cover

Low maintenance cost assured
The halogen lamp is user replaceable without unit downtime with protective chamber for easy cleaning (lamp life is 5000 hours)

Progress window for heating check
Heating process can be checked through the translucent window

Self Check function
Deflect check function is available with temperature control

Quick Reference card
A convenient operating guide is installed at the bottom of the analyzer

Standard RS-232C
Bi-directional communication with a PC or connects directly to a printer

Conformity to GLP, GMP, GCP and ISO with date/time, ID, calibration data and check record outputs
Data output for daily record management

 

Specifications

  MS-70 MX-50 MF-50 ML-50
Price $4346.65

More Info
$2714.25

More Info
$2194.50

More Info
$1650.00

More Info
Measurement Method 400W straight halogen lamp heating system with SRA filter and SHS weighing technology
Maximum Sample Weight Capacity 71 g 51 g 51 g 51 g
Weight Resolution 0.0001 g 0.001 g 0.002 g 0.005 g
Moisture Content Display 0.001 / 0.01 / 0.1 % 0.01 / 0.1 % 0.05 / 0.1 / 1 % 0.1 / 1%
Moisture Content Accuracy - over 1 g 0.05% 0.10% 0.20% over 1 g: 0.5%
Moisture Content Accuracy - over 5 g 0.01% 0.02% 0.05% 0.1%
Heating Technology Halogen lamp (straight type: 400 watt max, 5000 hours)
Drying Temperature 30-200°C (1° C increments) 30-200°C (1° C increments) 50-200°C (1° C increment)
Memory of Measurement Programs 20 sets 10 sets 5 sets
Measurement Programs Standard Mode, Automatic Mode, Quick Mode, Timer Mode, Manual Mode Standard Mode, Quick Mode, Measurement Mode
Measurement Mode Moisture content (wet or dry base), Dry content, Ratio, Weight Wet base, Dry base, Solid content, Ratio
Heating Mode Standard, Quick, Step, Ramp Standard / Quick
Pan Size 85mm 85mm 85mm 86mm
Communication Software WinCT standard WinCT Moisture Standard WinCT standard -
Display Type Large VFD
Interface RS-232C standard
Data Memory Function 100 50 30
Operating Temperature 5°C ~ 40 °C (14°F ~ 104°F)
GLP/GMP/ISO Available
Self Check Function Standard
Communication Software WinCT-Moisture standard WinCT standard -
Sample Pan Size 2.16 inches (0.85 mm) 3.4 inches (0.86 mm)
Power AC 100V to 120V or AC 200V to 240V, 50/60 Hz, approximately 400 W
Dimensions 5.46 W x 8.1 D x 4.4 H inches
(215 W x 320 D x 173 H)
8.5 W x 12.6 D x 6.8 H inches
(215 W x 320 D x 173 H)
Standard Accessories 20 Sample Pans, 2 Pan Handles, Tweezers, Spoon, Test Sample (30 g of Sodium Tartrate Dihydrate), CD-ROM Software (WinCT-Moisture for MS & MX, WinCT for MF), Glass Fiber Sheet, RS-232C cable (for MS, MX), Display Cover, Dust Cover, Instruction Manual, Quick Reference Card, Power Cable, Fuse

 

WinCT-Moisture Software

AND Weighing WinCT-Moisture Moisture Analyzer Software

With AND Weighing's WinCT-Moisture software, data measured by the moisture analyzers can easily be displayed on your computer. Effective for determining measurement conditions such as heating temperature, and useful in reducing the time needed for measurement and improving accuracy.

Displays moisture rate changes over time in a graph - displays changes in moisture rate in real time

Measures moisture rate in a minimum time with excellent accuracy - heats at the highest temperature without changing the physical properties of the sample and provides measurements with good repeatability

Automatically determines the most suitable heating conditions in a short time - automatically changes the heat applied by the set increments and interval time within a range of 30 to 200°C. From the moisture rate change over that time can determine the most suitable heating temperature in one measurement

Shows sample data summary - provides a data summary for the sample with the results of moisture rate change for the representative material's measurement

  • Calculates measurement data statistics
  • Saves the recorded data as a .csv file
  • Determines other changes to the sample material in addition to the moisture rate - continuously measures changes to the mass in response to heating temperature and detects other material changes besides the moisture rate

 

WinCT-Moisture Measurement Sample

WinCT-Moisture consists of RsTemp software to determine the heating temperature and RsFig software for graphics

1. Example of measurement using RsTemp software to determine the heating temperature - Automatically changes the heating temperature (by setting increments and interval time) within a range of 30 to 200°C. From the rate of change in moisture over time, in one time measurement it can determine the optimum heating temperature for the sample

AND Weighing WinCT-Moisture Moisture Analyzer Software

2. Example of measurement using RsFig graphic software - Can show moisture rate against time when the heating temperature is changes as well as showing the results of repeated measurements at a certain temperature. From the graph, the highest possible heating range for the sample and the quickest measuring time can be determined.

AND Weighing WinCT-Moisture Moisture Analyzer Software

 

Comparison between MS-70 and the KF (Karl Fisher) Method

Example of PET plastic pellet measurement

  Moisture Rate Average measurement time Measurement Conditions
Average Value Repeatability
(standard deviation)
MS-70 0.298% 0.0045% 6.8 mins Heating temperature 180°C
Test sample 10g
Measurements 5 times
KF Method 0.307% 0.0065% 19.1 mins Heating temperature 180°C
Test sample 0.3g
Measurements 5 times

With PET plastic and other materials, the MS-70 can measure a drop of moisture content less than 1%. Specialist knowledge is not necessary to operate the MS-70, and since measurement occurs quickly, no harmful waste is produced.

 

AND Weighing MX-50, MS-70 and MF-50 Moisture Analyzers

AND Weighing MX-50, MS-70 and MF-50 Moisture Analyzers

AND Weighing MX-50, MS-70 and MF-50 Moisture Analyzers


Monthly Specials | Request Quotation | Products | About Us |  Weight Conversion Calculator  | Shipping Cost Estimator

Baby Scales | Bathroom Scales | Bariatric Scales | Body Fat Scales | Pro Body Composition Monitors | Calibration Weights | Counting Scales | Crane Scales | Fish/Game Scales | Floor Scales | Food/Grocery Scales | Force Gauges | Height Measuring SystemsHome Use | Industrial Scales | Jewelry Scales | Kitchen Scales | Laboratory Scales | Legal for Trade Scales | Livestock ScalesMechanical Hanging Scales | Medical Scales | Moisture Balances | Pallet Scales | Pocket/Mini Scales | Shipping Scales | Test Stands / Force Measurement | Veterinary Scales | Value Electronic Scales | Value Mechanical Scales

A&D Weighing | Acculab | Best Weight | CAS | Chatillon/Ametek | Detecto | DigiWeigh | Dillon Crane Scales, Dynamometers & Force Testing | EasyWeigh | HealthOMeter | Hoto Instruments | Imada Force Measurement | InScale | Mark-10 | MedWeigh | Mettler Toledo® | Minx Economical Pocket Scales | Ohaus | Salter Brecknell | Sartoroius | Seca | Tanita  

Home Fitness Products | Omron Blood Pressure Monitors | Polar Heart Rate Monitors


1999- valuescale.com, all rights reserved
EMail sales@valuescale.com for comments or questions about your order